Ceramic wide cutting-piece replacement compatible with Artero A5 blade bodies; restores the edge for sizes 10 to 3/4 without replacing the metal housing.
Restore cutting performance
The piece allows replacing only the cutting surface—the first part to lose its edge—to recover cutting performance without buying a complete blade. It is compatible with sizes 10, 30, 15, 8½, 7, 7F, 5, 5F, 4, 4F, 3F, 5/8 and 3/4; check the number engraved on your blade body before ordering.
Lower heat transmission
Ceramic conducts less heat than solid steel, so the blade tends to heat up less during long work days.
Installation and maintenance recommendations
Place the piece on a clean, dry blade body and lubricate the edge before first use; a body with hair or dirt will prevent correct cutting. After each service, brush, cool, and lubricate according to your usual routine to extend edge life.
Instructions for use
- Remove the plate and clean the blade body, removing hair and any dried lubricant.
- Place the ceramic replacement aligned on the body and secure it with the plate following the reverse order of disassembly.
- Apply a small amount of lubricant to the edge before first use and perform a cutting test on a trial area.